How To Make Steering Wheel Control Work With Our Head Unit?
☺
New Version:
There are 4 wires for steering wheel control. They are CANIN, CANOUT, KEY and IR.
1)Universal Head Unit(ISO wiring harness & no canbus)/Special Head Unit without Canbus:
①Please connect KEY wire with CANOUT wire like below picture.
②If your car has 3 steering wheel control wires: KEY1, KEY2 and GND, please connect them with our related wires. Below is our KEY wires. If your car does not has 3 wires, just connect the wires you have with our wires.
③After above steps, please set the functions of your steering wheel control by this app.
Do you know how to learn steering wheel control with our head unit? Your left hand needs to long press one of you swc buttons and right hand click the function you want in our CONTROL APP at the same time. Do not move your hand away untill you see the words in APP in yellow color.
Here is a video for your reference: https://youtu.be/wuj-PF7JQuU
2)Volkswagon/Toyota/Honda Head Unit with Canbus:
①Please connect CANIN with CANOUT.
②Please select right canbus option. Please contact us if you don't know which canbus option you need to choose.
3)Ford Focus/Jeep/BMW E39/E46 Head Unit with Canbus:
①Please connect IR with CANOUT.
②No need to learn steering wheel control in CONTROL app.
Old Version
The motherboard of universal head units:
The resistance of steering wheel control is on KEY1 and KEY2.
The motherboard of special head units for VW:
The resistance of steering wheel control is on RX and TX.
If you would like to use universal remote control for your car,
①please remove the resistance from RX to KEY1, TX to KEY2. Here is a video: https://youtu.be/ukSpJDFXHRY
②If your car has 3 steering wheel control wires: KEY1, KEY2 and GND, please connect them with our related wires. Below is our KEY wires. If your car does not has 3 wires, just connect the wires you have with our wires.


















Comments
Post a Comment